Description
AZU-200 V1-bell-shaped Cap with a max. working pressure 0.6 MPa is a device designed and tested as a valve for pneumatic high-pressure containers transport a mixture of powder materials with air at the temperature of the mixture to 160 ° c. It is intended for both regular and occasional closure pressure vessels with powder non-stick materials on the maximum size of the grains into the 4 mm, for outdoor or indoor environment with non-explosive dust, with temperatures around-25 ° c …. + 50 ° c.
The CAP consists of a cylindrical body with the top and bottom flange. The housing is equipped with a bracket for mounting pneuválce, casing for the imposition of a shaft and sealing taper parts using the seal. This movable part is suspended on the lifting lever PIN associated with the shaft. The shaft is controlled by a pneumatic cylinder with pressure distributor pěticestným, which is over pneuventily (pneuklapky) connected to the compressed air.
The use of the
The CAP is designed for both regular and occasional closure pressure vessels with powder non-stick materials on the maximum size of the grains into the 4 mm and max. temperature to 160 ° c.
The benefits of
Compact design, reliability, tightness, high accuracy, trouble-free operation, easy replacement of worn parts.
The parameters of the
| Own weight zvonového Cap |
approx. 105 kg |
| Average air consumption when the cycle close/open | 0.94 l |
| Max. bulk density of the material | 1600 kg/m3 |
| Max. the size of the grains of the material | 4 mm |
| Max. the largest share of the grain mass. | 2% |
| Max. allowed temperature of the transported material | 160 ° c |
Dimensional schema
To download a prospectus in Adobe PDF format, click AZU_200_zvonovy uzaver