Description
The flap is made of a welded body, the square of the input (the top) and output (bottom) side flanges, which is associated with the corresponding technological equipment. They are stored in the side walls of the axis of rotation of the shoulder blades, rotating in the stored outside of the bearings. The axes are controlled pneumatically via a lever, located on their ends. For the operation of the vane so that the work is always at least one closed. In the event of power failure (el. the current air) also remains at least one blade in a closed state. When you close the throttle is set correctly after the impact of the scapula to the stop to the slightly flexible deformation of the blades (damped vibration), which causes the release of any material from the surface of the shoulder blade stuck.
To include the damper control circuit for controlling the excitation of elektroventilů, controlling pneuválce. The circuit allows you to set the frequency and length of the excitation of individual valves.
Technical parameters of ADKp 200 (250 ADKp)
| The standard dimensions of flanges | 200 x 200 mm (250 x 250 mm) |
| Recessed height | 650 mm (600 mm) |
| Bulk density of the material | 0 … 2000 kg/m3 (0 .. 2000 kg/m3) |
| Max size of the grains of the material | 40 mm (40 mm) |
| Max. the volume of the material passed ADKp 200.250 | 0.2 m3/h (0.2 m3/h) |
| Max. the volume of the material passed through the ADKp 1000 | 10 m3/h |
| Recessed height ADKp 1000 | 1500 mm |
| The scope of work temperatures around | -20 ° c … + 50 ° c |
| Max temperature of the material. | about 150 |
| Cover of the control circuit | IP 66 |
| Power supply | 230V, 50 Hz/10 W |
| Frequency range of the cycle | 1-120 times/hour. |
Use of the product
Divider flap is intended for technology pipeline transporting bulk materials of odsávaných and is used to abort unwanted draught these pipelines. An example is the location of the výsypkami or elektrofiltrů under separators combustion boilers. Forced air drive allows you to use the flap for materials with a tendency to clog. (for example, municipal waste incineration fly ash).
The flap can be advantageously used for the separation of the stroke on the entry of bulk materials into Rotary tumble dryers or anywhere where there is a need to prevent unwanted moves in the transportation of bulk material between areas with different pressures, for example, under the wind sorter industrial mills.
Working conditions:
Divider flap is intended for outdoor or indoor environment with non-explosive dust, with temperatures around 20 ° c … + 50 ° c and max temperature of the material to 150 ºc.
Advantages:
Compact, durable design, high reliability, virtually maintenance-free, despite, long life.