The flap is made of a welded body, the square of the input (the top) and output (bottom) side flanges, which is linked to snavazujícím technological equipment. Vbočních walls are stored the axis of rotation of the shoulder blades, rotating in the stored outside of the bearings. The axes are controlled pneumatically via a lever, located on their ends.
For the operation of the vane so that the work is always at least one closed. In the event of power failure (el. the current air) also remains at least one blade in a closed state. When you close the throttle is set correctly after the impact of the scapula to the stop kmírně the elastic deformation of the blades (damped vibration), which causes the release of any material stuck zpovrchu blades.

Description The filter consists of a cylindrical container, fitted with a mechanical system for wiping the inside walls and dočisťovacích nozzles. At the bottom is lifted pneumatically, removable bottom fitted with a trolley for easy handling. Filtering off provides 12 filter cartridges with special editing surface that enables easy cleaning. For the perfect dust removalRead more about Scratch ASF 1200 filter[…]

Description The design of the mobile equipment is based on the chassis of the shunting diesel locomotive T333 supplemented by electric actuator and the winch cord. MPZ 40 is controlled from the operator's location by using the buttons "forward" and "REVERSE". Stop the mechanical brake independent of supplies of electrical power. The device also hasRead more about Mobile shunting MPZ-40[…]

Description The flap is made of a welded body, the square of the input (the top) and output (bottom) side flanges, which is associated with the corresponding technological equipment. They are stored in the side walls of the axis of rotation of the shoulder blades, rotating in the stored outside of the bearings. The axesRead more about Double separator valve ADKp[…]

Description AZU-200 V1-bell-shaped Cap with a max. working pressure 0.6 MPa is a device designed and tested as a valve for pneumatic high-pressure containers transport a mixture of powder materials with air at the temperature of the mixture to 160 ° c. It is intended for both regular and occasional closure pressure vessels with powderRead more about Bell-shaped Cap AZU 200 V1[…]

Description Equipment for filling road tank vehicles with a filling nozzle APAC 40 is intended for performance of truck tanks, or other means of transport jemnozrnnými of bulk materials. The device is intended for the internal and external environment, with temperatures around-20 ° c … + 40 ° c the device consists of a frameRead more about Equipment for filling road tank vehicles with a filling nozzle APAC 40[…]